Asked by chesterdog3 Nov 05, 2014 at 03:41 PM about the 1994 Chevrolet C/K 1500 Cheyenne Extended Cab LB 4WD
Question type: Maintenance & Repair
LOW BEAM WILL NOT STAY ON. REPLACED SWITCH, NO HELP.
is it a push out high beam or a pull in high beam
chesterdog3 answered 9 years ago
CHESTER DOG 3 PULL IN WAS MY ANSWER TO YOUR QUESTION. STILL NEED TO KNOW WHY WON'T STAY ON. THJANKS
LOW BEAM WILL NOT STAY ON. REPLACED SWITCH, NO HELP.
1994 Chevrolet C/K 1500 Cheyenne Extended Cab LB 4WD
-
Maintenance & Repair
I have a 1988 Chevy truck with tbi engine. I replaced the ignition module, ignition coil and spark plug wires now it starts but shut off I got fuel coming in replace led the fuel filter still does ...
1988 Chevrolet C/K 1500 Silverado LB RWD
-
Maintenance & Repair
Truck will turn over but won't stay running. I'm doing a fuel pressure check tomorrow, but would like to have some other idea on what to check. Fuel pump is okay so it's not that.
1999 Chevrolet C/K 1500
-
Maintenance & Repair
My truck puttered then died. At a stop light. Will not start.it tries to turn over. But won't. Won't start . Never had problem before. Never sluggish, never had slow take off prior to it stoppin...
1991 Chevrolet C/K 1500
-
Maintenance & Repair
The shifter will not stay in park reverse or drive if you let go of it it will drop down into 1st gear. If you hold it in drive it drives fine shifts fine. To back up you have to hold the shifter ...
1990 Chevrolet C/K 1500 Scottsdale Extended Cab 4WD
-
Maintenance & Repair
CarGurus has 5 nationwide C/K 1500 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.