I have a 99 chevy 5.7 engine reads 55-60 fuel pressure, getting spark to #1 cylinder, but wont start, i removed the intake to check spider injector were fireing on rotation, they are, stumped

I have a 99 chevy 5.7 engine reads 55-60 fuel pressure, getting spark to #1 cylinder, but wont start, i removed the intake to check spider injector were fireing on rotation, they are, stumped 3 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engine i think controls when the spark happens i also replaced the module on backside of distributer, the distributer, the coil,the wires the plugs, bht havent done the cap and roter.is that the only thing that will stop the spark process?ive also checked the oil pressure and water temp sensors 3 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engi...

I have a 1995 Chevy K 1500 5.7 engine issue with fuel injection I unplugged the left injector the truck stalls if I unplugged it right injector the truck stays running then when you drive it's got a b 1 Answer

I have a 1995 Chevy K 1500 5.7 having a problem with the fuel injection seems to one side to get more field in the other one I put a new fuel injector in it if I unplug the left side the truck stal...

my 1994 Chevy 1500 350's rpm gauge keeps serging up and down It also sputters during acceleration and at 55 60 mph it bogs down or surges in power and speed. Can anyone tell me were to start trouble shooting, It also has a spark in the dark up by the distributer cap 2 Answers

sputters during acceleration, surges on the highway bogging down every few seconds, rpm gauge is constantly surging up and down, does back fire alittle when I punch the gas and I think there is a spar...

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...