Asked by bt0210 Sep 17, 2011 at 03:52 PM about the 2007 Chevrolet HHR LS FWD
Question type: Maintenance & Repair
I had to drill 3/16 in. holes and use stainless steel aircraft lockwire to repair. I know that only a limited number of people have access to lockwire, and 410 dollars is insane for a door handle.
Go to any auto interior shop, they can match the color and material, and make it better than new.
I ordered a after market replacement online. comes with all the tools to replace the original. was an easy one hour job. beats buying a complete panel from GM... just search for replacement door handle HHR
I had to drill 3/16 in. holes and use stainless steel aircraft lockwire to repair. I know that only a limited number of people have access to lockwire, and 410 dollars is insane for a door handle.
2007 Chevrolet HHR LS FWD
-
Maintenance & Repair
Hazard lights turn on before engine start up, and remain on for 10-15 seconds (turns off when car turns on) Hazard lights turn on after engine turns off, and remain on for 5-10 seconds.
2006 Chevrolet HHR LS FWD
-
Maintenance & Repair
When I place my hhr in park it has always unlocked all door and when I remove it from park it locks all doors. It has stopped. I can still lock all doors with the switch on the drivers door or by the ...
2007 Chevrolet HHR LT FWD
-
Maintenance & Repair
My driver door Will not lock unless I push the mob down , and won’t unlock unless I use my key . Is it a fuse , switch or something inside or the door panel ?
2008 Chevrolet HHR LS FWD
-
Maintenance & Repair
My driverside door was smashed in on my 2007 HHR, and I found a 2006 HHR door. Can I replace my 2007 HHR door with a 2006 HHR door?
2007 Chevrolet HHR
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.