THE FACTORY RADIO IS NOT PICKING UP ALL THE CHANNELS IN XM RADIO
I have a factory radio and 3 AUX options for XM Radio, but the radio only picks
up all the channels on AUX 2. My options are very limited for AUX 1 and 3.
Any advice?
Asked by Andrea Nov 24, 2015 at 11:54 AM about the 2006 Mercury Mountaineer Premier RWD
Question type: Maintenance & Repair
I have a factory radio and 3 AUX options for XM Radio, but the radio only picks
up all the channels on AUX 2. My options are very limited for AUX 1 and 3.
Any advice?
Did you say factory radio? . Don't get this fixed , it rarely solves anything. Look for an after market solution, like an Alpine, they make outstanding products.
My husband install a radiator yesterday and I might 2010 Mountaineer now my radio won't work in it at all what's the problem
I have a factory radio and 3 AUX options for XM Radio, but the radio only picks up all the channels on AUX 2. My options are very limited for AUX 1 and 3. Any advice?
2006 Mercury Mountaineer Premier RWD
-
Maintenance & Repair
THE RADIO WORKS FINE BUT SAYS CD ERROR--CD DOES NOT WORK
Mercury Mountaineer
-
Maintenance & Repair
I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. T...
2004 Mercury Mountaineer Convenience AWD
-
Maintenance & Repair
radio powers up cd ejects no volume
2006 Mercury Mountaineer Premier AWD
-
Maintenance & Repair
as I said my pedal is going all the way to the floor after I replaced the break pads and the rotors on the back the vehicle stops but the break pedal goes all the way to the floor
2000 Mercury Mountaineer AWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.