The grooved idler pulley part of the supercharger drive belt system blew apart. Is there a spacer that fits in between the bearing on the pulley? The Dealership I went to was no help.

The grooved idler pulley part of the supercharger drive belt system blew apart. Is there a spacer that fits in between the bearing on the pulley? The Dealership I went to was no help. 1 Answer

Can I run a supercharged engine without the supercharger working? 2 Answers

My car is making a screeching noise. I changed both idler pulleys (smooth tension pulley and grooved alignment), but the noise persists. When I removed the belt that drives the supercharger the nois...

Low Coolant Sensor on 1999 Buick Regal GS (Supercharged) 3800 stays on, but no low coolant in system. Where is the sensor on the GS? 1 Answer

My 'mechanic' stated I needed to change the Coolant Reservoir on my 1999 Buick Regal GS (Supercharged,) as he says there is a 'float' in the rear of the overflow tank that sticks after awhile. I do...

what would make coolent pump out of the engine it look like a hose was there in the rear of the engine 1 Answer

coolent comming out of a place that look like a hose had been attached at the rear of the engine

my car just died while i.was driving on the freeway. the battery was completly dead. i charged the battery to 13.2 on the power meter. i am not getting any crank of any kind. but the lights and dash l 2 Answers

no nothing from.motor... and the security light is on in the dash