Ive taken my 99 z3 2.3 to have it scanned,( dsc and abs lights are on ). The bmw garage says that the scanner will not communicate with the abs/dsc module. Has anyone had this issue?

Ive taken my 99 z3 2.3 to have it scanned,( dsc and abs lights are on ). The bmw garage says that the scanner will not communicate with the abs/dsc module. Has anyone had this issue? 1 Answer

Is the DSC Control Unit faulty? 1 Answer

Hi I have a 2002 Z3 3 ltr that has had water ingress in passenger footwell where the DSC sensors are the signs were the DSC warning light and brake fluid warning lights permanently on.. After emptyin...

DSC and Amber break lights 2 Answers

Driving along and the front right brake will pulse and then the two lights come on DSC and the amber brake light.took to BMW dealer could not find any thing wrong.Lights are gone after restart vehi...

98 bmw z3 and the alarm has stopped working 3 Answers

Hi I have a 98 bmw z3 and the alarm has stopped working, the led on the dash is continually flashing and there is a beeping noise from the box under the hood, so I turned the immobiser off and back on...

hello I have a 1999 BMW Z3 2.5 it WILL not start and it's killing me. it engine turns over runs for a few seconds but then dies and cuts off. I have replaced the spark plugs 5 Answers

hello I have a 1999 BMW Z3 2.5 it WILL not start and it's killing me. it engine turns over runs for a few seconds but then dies and cuts off. I have replaced the spark plugs replaced the fuel and ...