2000 S10 4.3....won't crank, replaced ignition switch because no power to the solenoid wire...no change....I have no power to the dash, can't hear the fuel pump run.. happened all of a sudden... acts like there is no power to the ignition switch..
3 Answers
You can get schematics to look at , autozone website. The shifter is in park or neutral,right, but is there a safety for stepping on the brake ? or a clutch switch ? Read your schematic and plan where to check for power with a 12v test light or voltmeter after following jim's suggestion. power distribution box cable connection can be checked for clean and tight. and of course battery connections cleaned and brushed to a shine, assembled, and tight, then power and ground at main cables. charged up the battery.
2 people found this helpful.
