Yes, you can get over size bearings up to certain tolerances for just about anything. You will need to know the exact sizes of all the journals, how much you need to gain in each ( in thousandths) and if journals are identical within tolerances. If not you will need a good auto machinist to cut the crank to the next smaller size. When all is ready, go to Federal Mogals website and order your bearings or have your machinist do it.
Can u get an oversized rod bearing for a 4.3 in a 97 S104x4
1997 Chevrolet S-10 LS Extended Cab 4WD
-
Maintenance & Repair
Will a 2.5 engine out of 84 s10 interchange with a 90 s10
1990 Chevrolet S-10 RWD
-
Maintenance & Repair
Will a 1995 S10 pickup 2.2 5 speed transmission will it fit a 1998 S10 2.2 I am both of them are two wheel drive
Chevrolet S-10
-
Maintenance & Repair
My s10 won’t start the radio and head lights come on but the instrument cluster and ignition act like they are not getting any fire
2000 Chevrolet S-10
-
Maintenance & Repair
S10 won't start, but the lights will turn on. Tried getting it to start lastnight, still didn't wanna start. How do you get the starter to start after not wanting to start.
2001 Chevrolet S-10 LS LB RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.