truck wont turn over with key new cilnoid the ignition switch seems to be fine its on a 92 f 250 460 engine

truck wont turn over with key new cilnoid the ignition switch seems to be fine its on a 92 f 250 460 engine 1 Answer

I have a 83 F-250. 460 with a 4 barrel. 2 Answers

The truck will start up and run fine for 40 minutes then just die like you flipped a switch. No stalling just dies. Let it sit for an hour and it will start back up. I have replaced the ignition contr...

1988 Ford f250 351. starter keeps trying to turn my engine over. even with the key in my hand 5 Answers

A few days ago my truck burnt out the battery cables. replaced. today it was trying to crank over with out turning on my ignition. the only way to stop it was pulling the pos battery cable off. anyo...

I am working on a 94 V8 F 250 with a V8 And am using the wiring harness off a 96 F 150 with a 6 cylinder Te connections were different to the computer can I use the ECM from the 6 cylinder with a V8 1 Answer

I had to switch out wiring the wiring harness in a 94 F250 with the wiring harness out of a 96 F150 which had a 6 cylinder in it. The ECM connections were not the same to the ECM . Can I use the ECM...

Ford F250, brand new battery, new, tight cable posts. Electricity throughout truck works great. Turn on key, lights on dash come on, but that's it. No clicking, no starter. Nothing. 460, automatic 3 Answers

1986, just out of the shop and was starting and running great. Before it went to the shop, solenoid clicked. Now, nothing. Help!