I have a 4.6 with a new head job and first loss compression in #6 and now both sides. Any suggestions on what to do
1997 Ford F-150 Lariat 4WD LB
-
Maintenance & Repair
Number one cylinder 190 lb number 2 cylinder 185 lb number 3 cylinder 185 lb number 4 cylinder 125 lb number 5 cylinder 135lb number 6 cylinder 165 lb number 7 cylinder 80 lb number 8 cylinder 1...
2001 Ford F-150 XLT Extended Cab 4WD LB
-
Maintenance & Repair
I had a valve cover oil leak because my old ones were bent. I replaced them after letting the truck sit for a month or so. The truck started up before it sat for a month or so, and I replaced the valv...
1984 Ford F-150
-
Maintenance & Repair
I have a 94' ford ranger that runs but failed inspection due to losing compression pressure, any help would be greatly appreciated. Thanks
1994 Ford Ranger XL Standard Cab SB
-
Maintenance & Repair
I have a 92 f150 with the 4.9 inline 6 in it it had sat for approx 5 years with out running due to bad trans so i put lots of new parts on i ( plugs wires cap batt air and fuel filter rear man on mo...
1993 Ford F-150 XL LB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.