mornig everybody just wanted help locating the switcher valve on my 93 F150 4x4 its been down over the last four years i havent seen it since

mornig everybody just wanted help locating the switcher valve on my 93 F150 4x4 its been down over the last four years i havent seen it since 1 Answer

why wont my 4x4 work on my 1998 f150. i got 4x4 on the fly. 1 Answer

my 4x4 says its locked in on my 1998 f150 but the front tires dont pull. replaced front axles and actuator and still doesnt work. i feel it pulling a little bit but when i go to hit the gas a little m...

I can't read my codes on a 1990 f150 5.8 4x4. started good yesterday today it just cranks over.engine light stays on all the time even when it was running but couldn't read the code. could it be pcm? 4 Answers

it has a tune up within the last month. new coil. ignition module. was still running rough. read codes ( i could at the time last week) egr valve put new one on now it just cranks over. still has eng...

when should i replace my ECM on my 1990 f150 V8 5.0 4x4? If i have the money should i do it anyways? I have already replaced the whole Cat, Mufflers, EGR Just because I live in California. 3 Answers

my truck feels like I am not getting any get up and go. It does not raise RPM fast enough and it slows down going up hills that are paved. I have already done the EGR which has helped a lot and I a...

My 93 f150 4.9 has run perfect for years. Then, started to stall and jerk. My mechanic replaced the Idle air Control Valve and ran perfectly for about 30 miles,then back to the same. What else should 2 Answers

My 93 f150 4.9 has run perfect for years. Then, started to stall and jerk. My mechanic replaced the Idle air Control Valve and ran perfectly for about 30 miles,then back to the same. What else should ...