i have a 1992 toyota pickup 4x4. i noticed gear oil coming out of the end of the rear axle. i plan to replace the seals and bearings while im back there. my ? is how do i know if i have a 7.5" or a 8"

i have a 1992 toyota pickup 4x4. i noticed gear oil coming out of the end of the rear axle. i plan to replace the seals and bearings while im back there. my ? is how do i know if i have a 7.5" or a 8" 1 Answer

okay guys I know I asked a lot of questions on here but I have a major problem I have a 92 Toyota pickup that has no fire I've already replaced the distributor the coal ignitor module relays and fuses 7 Answers

what else can I do to get this truck to fire

my altenater went out in my toyota pickup. i replaced it and it lasted 2 days and now i only get 9 volts coming out of it. i have been having problems with the lights,turn signals, and heater causing the volt meter to drop drastically if i use them. what should i check? 1 Answer

checked all wires and relays. they're all good.

I have an 89' Toyota pickup, its a 5-speed manual with a V6. The other morning when I went to start it, it wouldn't start, after getting my Fiance to come give me a push down the driveay it started right up and didn't do it again the whole day. Today as I was driving down my road it just cut off and wouldn't start back up. What could be the issue? 1 Answer

I have an 89' Toyota pickup, its a 5-speed manual with a V6. The other morning when I went to start it, it wouldn't start, after getting my Fiance to come give me a push down the driveway it started...

I have a 1986 Toyota Pickup 22R Engine 4 speed manual. The water flow has sand in it. I just replaced the head gasket yesterday Sept 15, 2013. Is there anyone who could help me out by telling me what is the best way to get the sand out of the water flow? Thank you. 1 Answer

The Toyota has been sitting for awhile not running. But now the head gasket was replaced. It started up & Idled fine till the one of the freezer plug blew off. So I turned off the truck. When I looked...