I just had my Catalytic Converter changed and o2 sensor changed on my 1999 Jeep Grand Cherokee. I am unable to get it to crank it turns over but will not crank could it be from the Catalytic Converter

I just had my Catalytic Converter changed and o2 sensor changed on my 1999 Jeep Grand Cherokee. I am unable to get it to crank it turns over but will not crank could it be from the Catalytic Converter 1 Answer

why my jeep grand cherokee 2000 turned of when am going to slow down or to stop , and it turned on when i start it again , i changed the fuel filter and i cleaned up the idle sensor i changed the coil and the 6 sparks but it seems that doesn't work . i but it on the scanner but no fault codes were stated any help please??? 4 Answers

why my jeep grand cherokee 2000 turned of when am going to slow down or to stop , and it turned on when i start it again , i changed the fuel filter and i cleaned up the idle sensor i changed the co...

2002 Jeep Grand Cherokee 4.7L after sitting for sometime it starts. Go to the store park it come out crank but no start. changed crank sensor 2 times cam sensor ones and PCM. last time it did it checked the code said cam sensor again. My friend said mybe coil packs?? has 160,000 miles e mail rockon4025@yahoo.com 1 Answer

2002 Jeep Grand Cherokee 4.7L after sitting for sometime it starts. Go to the store park it come out crank but no start. changed crank sensor 2 times cam sensor ones and PCM. last time it did it che...

Jeep will not turn over and keeps stalling the few times I get it to run. 6 Answers

I have a 1997 Jeep Grand Cherokee Loredo and I have been having some issues with it. I noticed about a week ago that it would start to shudder and eventually stall whenever I would come to a stop. I t...

1994 Jeep Grand Cherokee will run and then just stop. There is no spark to teh spark plugs. When it cools down it starts up again. We have changed teh collnoid and the crank shaft sensor. 2 Answers

When driving the motor just quits. It will go a couple of miles then quit. We have changed the colloid and the crankshaft sensor and it still does the same thing.