1. Dis-conn negative battery cable 2. discharge A/C 3. Dis-conn lines from evap. Drain cooling 4.Dis-conn heater core hoses. 5.Remove overflow bottle 6. Remove PCM Bolts (leave PCM connected) 7. Remove heater nuts from engine side. 8. Remove instrument panel / Disconnect heat ducts 9. Remove connections / remove heater nuts passengr side 10. Remove heater unit. 11.Intsall reverse.
trying to change my heater core on my 1996 jeep grand cherokee???
1996 Jeep Grand Cherokee Limited
-
Maintenance & Repair
My jeep started up fine but whille driving and had to stop for a light the jeep sputtered and turned off. After removing the jeep to a safe place we opened the gas cap and a lot of water came from the...
2004 Jeep Grand Cherokee
-
Maintenance & Repair
My ABS light came on the other day. I read up on it and it said a variety of different things all pertaining to the breaking system of my jeep. I plugged a code sensor tool into the bottom of the da...
1998 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
not sure how to get the emergency brake cables off going to the wheels on my 2004 grand jeep cherokee
2004 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
Carpet is getting soaked while running the AC in 1996 Jeep Grand Cherokee Laredo. I do not think it is coming from the windshield or door. I am pretty sure it is ac condensation. There is probabl...
1996 Jeep Grand Cherokee Laredo
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.