i have put new brake shoes and rplaced the master cycucil and the brake booster. my brkes are still not righ what else can i do

i have put new brake shoes and rplaced the master cycucil and the brake booster. my brkes are still not righ what else can i do 1 Answer

keeping dragging and then locking after 10 to 15 miles down the road. I 've replaced both calipers, pads. brake lines, master cylinder, brake booster, ABS modular valve and ABS control module. My rotors are still new. I even bleed the brakes (all 4 of them). what can cause these issues? 4 Answers

Im having problems with my 2005 GMC Sierra 1500 5.3L V8 brake systems. My brakes keeping dragging and then locking after 10 to 15 miles down the road. I 've replaced both calipers, pads. brake lines...

I use about 2 to 4 oz. Of brake fluid after a few weeks I have to do the same. I have 80000 on my and it's been mine since new. I have no leaks at any wheel or master cylinder so we're does all e 1 Answer

Brake fluid use.

I have no brake lights are power to the lights 1 Answer

No brake lights no power to the brakes and fuses are good what am I missing and number eight on the door fuse block it says

I have a 91 GMC truck, the passenger side front brake caliper piston is not returning after I press on the brakes, I just replace the dust boot and the square cut seal and cleaned out the caliber, 5 Answers

I used brake fluid to lubricate the square cut seal in the dust boot, and I bled all four brakes extremely well, I will have to save my master cylinder is leaking from the back, could this be cau...