I have a 4.3 6 cylinder light truck with standard trans it was running fine and boom it just stoped running. Would not crank.

I have a 4.3 6 cylinder light truck with standard trans it was running fine and boom it just stoped running. Would not crank. 1 Answer

I have a 2016 Sierra SLE I came out and started my truck had been driving it that morning it was fine. I come out the store I started my check engine light is on and it would not go in drive. 8 Answers

I started my truck drove it fine earlier came out store i started it my check engine light come on and my truck will not wouldn't move when I put it in drive. everything was good earlier when I drov...

I have a gmc sierra 07 model, 4 whl drive with a 6 in lift. I put it in drive and push the gas and it goes fine but will not shift from 2 to 3 at all. Sometimes i put it in gear and it jerks hard and 1 Answer

My truck don't wanna shift from 2nd to 3rd, and sometimes won't go in 1st. Also at times when going from park to drive or to rev it jerks real hard and dies. U can hear the trans when u change fr...

I had a 2016 Sierra SLE I came out and started my truck had been driving it that morning it was fine. I come out the store I started my check engine light is on and it would not go in drive. 2 Answers

I started my truck drove it fine earlier came out storm started it my check engine light come on my truck will not put in drive will not go the roast was good everything was good but 10 minutes lat...

04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer

died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...