Hard to answer this question, rattle while starting, driving, when does it occur. Check if the bolts are tight and contact with the flywheel are correct, If all is OK then listen to the starter itself, if it is grinding, it may be the starter and the motor that turns it. It can be rebuilt. If it's the flywheel, it will shudder when starting because of missing tooth or teeth.
2005 Chrysler PT Cruiser Touring Wagon FWD
-
Maintenance & Repair
05 pt cruiser. Replaced battery. And starter. Car periodically won't start. Sometime I go days no issues.. run around all over town.. other days I run five stores at least once when I come out I p...
2005 Chrysler PT Cruiser Touring Wagon FWD
-
Maintenance & Repair
The resiviour was bone dry this morning so i added antifreeze to the resiviour. However, its not going and circulating like its supposed to. The gauge says that the temp is climbing slowly when idl...
2005 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
starter only clicks, tried jumping off, had battery tested, switched relay with known good relay, even put new starter on still just clicks.
Chrysler PT Cruiser
-
Maintenance & Repair
Whining sound on accelarating PT Cruiers 2006
2006 Chrysler PT Cruiser Limited Wagon FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.