I need to remove drivers power seat which is all the way back and the power seat stopped working, breaker is good? I can get the two front nuts off but can't get to the back ones.

I need to remove drivers power seat which is all the way back and the power seat stopped working, breaker is good? I can get the two front nuts off but can't get to the back ones. 1 Answer

yes my lock is triped in the lock position on the 75 corvette new lock mechanism and the door panel is still atached so how do i get the door to open i have access the the two metal roday that i can pull on with a screw drriver is there another latch some were that im missing what are my opttions here 1 Answer

i have new lock and new latch that was installed on a 75 corvette when i put the pannel on i closed the door and now the door will not open so what are my options to get the door opened thank you mr...

1977 corvette has been sitting since 1988 what do i do to get it back on the road?? 13 Answers

1977 Chevy Corvette 1 owner since purchase in fall of 1976 less then 17k miles nothing has been changed still has factory tires. it has been sitting tho since 1988 it looks like a a brand new car ( ...

Hey all. I have a 1975 Corvette C3. I just did something stupid. I pulled my alternator to have it checked; however I did not disconnect the battery. As I disconnected the battery cable from alternator, it arc'ed badly. After having the alternator checked, upon reinstalling it, I have no power at all. I'm trying to determine which fuse, or relay, or whatever I have blown. Any help is appreciated. I do not have a fuse box layout. Thanks Apostle Smith 2 Answers

As stated in the subject question, but again, I have a 1975 Corvette C3. I ust did something stupid. I pulled my alternator to have it checked; however, I failed to disconnect the battery first, ...

1966 Corvette/Ragtop Q: I replaced my front tires and wheels with standard sizes. I noticed the front tires have different clearance in the fender well. The left side is very close and rubs when I turn hard right or left. Are there steps I can take to rule out issues and diagnose the true problem? 1 Answer

1966 Corvette/Ragtop Q: I replaced my front tires and wheels with standard sizes. I noticed the front tires have different clearance in the fender well. The left side is very close and rubs when I ...