what brand of manual trans comes in the 1981 corvette? Muncie or borg?

what brand of manual trans comes in the 1981 corvette? Muncie or borg? 2 Answers

1981 corvette rod knocked a hole in oil mpan car will still run but motor shakes. 1.If a rod is broke or bent and went out the oil pan is the engine junk? 2.Is there any way of replacing just the bent or broke rod that put a hole in the oil pan 2 Answers

Can you take the broken rod out by taking the oilpan off to get to crankshaft to undo the broken or bent rod and can you get to the other end of the rod in the piston? Should the whole engine be rebui...

are the 6 speed manual trans clunky in 1 2 2 Answers

my 2005 6 speed man trans is clunky in 1 & 2 when cold is this normal also clutcht is way out and jumpy when starting in first

1981 Corvette Question: AM/FM Radio w/8track Installation HELP!!!!!! 3 Answers

I have a AM/FM Radio 8 track that I have tried to have installed by a dealership and a local radio/stereo store but the installer at the Stereo store said that it needed a bracket built so the weight ...

I have an 81 corvette w/43k miles. Excellent /original cond. I had it stored for 18mths. I heard a knock in it and dealer says the cam shaft needs repair. Is this worth it? 16 Answers

hello sir, I have a 1981 corvette. It is all original with about 44k miles on it. I had it stored for about 2 years. I took it to the dealership for an oil change and I heard a knocking in the moto...