hi ,i have a1996 S10 ,2.something 5speed.i have a knock sensor cod showing on diognostic i replaced it 50 miles ago engine light still on,what can i do { help and thank you}

hi ,i have a1996 S10 ,2.something 5speed.i have a knock sensor cod showing on diognostic i replaced it 50 miles ago engine light still on,what can i do { help and thank you} 2 Answers

I have a 1986 chevy s10 2 dr std standard cab sb and I had to replace the engine ,I put a 1991 s10 motor in it but having problem with tbi 1 Answer

I have a 1986 chevy s10 2 dr std standard cab sb and I had to replace the engine ,I put a 1991 s10 motor in it but having problem with tbi My friend keith swaped it out for me he said the 91 tb did no...

I have a 1995 S10LS V6TBI engine in it. I am having a problem with the air conditioner blower motor. When you turn it on. it may or may not work and blow air for you. You can feel the cold air at the vent. but no blower to get it into the cab. I have already replaced the blower switch and it didn't help. Now I am stuck between the relay, the resistor or the motor itself trying to go out. Any help would be greatly appreciated. 1 Answer

1995 Chevy S10LS V6 TBI Engine Problem with a/c blower motor not working all the time Replaced blower motor switch and it still cuts in and out when it wants to Would the relay or the resistor cause t...

i have a 91 s10 it had a bad starter so replaced it still nothing 3 Answers

it with a new one still wont all it does it click it getting power and has a good ground wht else could it be

hello i have a 91 s10 with the 4.3 v6 the truck ran great with a broken motor mount on the driver side but after replacing it the truck wont start motor is getting gas fire and air PLEASE HELP 2 Answers

4.3 v6 with 3k+ miles ran great did full tune up still ran great then i replaced the driver side motor mount and it wouldn't start i used a jack to lift the motor to replace the broken mount im gett...