4x4 broke
Asked by woodchaser Oct 12, 2011 at 11:28 AM about the Ford F-150
Question type: Maintenance & Repair
my 4x4 dash switch clicks when i go from 2wd to 4wd an dont go in 4wd i changed the actuator on the front end an the 2wd an 4wd solenoidon the fire wall behind the battery u think maybe the switch on the dash or any other ideas u can give yhank u for ur help
3 Answers
if the switch on dash clicks,that is ok,the onley thing you havent replaced is the motor on back of the transfer case,it could be bad or the splines on the hub or axles are striped.
woodchaser answered 12 years ago
thank u for answering ive changed the trnsfer case shift motor about 1yr ago an the front hub bearings 6 months ago the splines looked fine everything worked good i put it in 4wd once in awhile just to keep everything going an it worked fine a month ago then last week it didnt go in an the switch started to click when i put it 4w high never heard the click before thats y i tought it could be the switch
good thing putting it in 4x4 every once in a while,just drive it for a mile or 2 then back to 2x4.try changing the switch and check the 4x4 fuse in fuse box.
