the old engine ran, but had cracked heads and blown head gaskets.put another engine in, and it starts and rus for a few seconds and then shuts off. can anyone help with this problem?

the old engine ran, but had cracked heads and blown head gaskets.put another engine in, and it starts and rus for a few seconds and then shuts off. can anyone help with this problem? 1 Answer

I have a 2007 Chrysler 300. One day the car is running fine. I put the key in the igntion and turn it and the radio and dash board lights go on. but the engine wont go on. I use my Autostart and the car starts right up. Can anyone pleae tell me what it could be . I thought it could be the Igntion Switch pin. 2 Answers

I have a 2007Chrysler 300. One day my car is fine. I get in my car I put the key in the igntion turn it on and the only thing that worked was the radio and the dash board lights.It would not start. ...

My 06 Chrysler 300 had oil going into the radiator. The shop is telling me the engine is holding pressure and are ruling out a blown head gasket. Also said the oil cooler is holding pressure as well. What else could cause this problem? 7 Answers

Oil mixing with coolant. Engine did not run hot nor was there any thick smoke from the exhaust. Engine and oil cooler are holding pressure. What would cause this problem?

Help Please I have 2008 Chrysler 300c 5.7 V8 Hemi !! I can crank the car over, but it idles for a second and cuts out. I also notice a small puff of smoke out the exhaust when it cuts out?? 1 Answer

What I have done... I changed the starter relay fuse and it worked for a day, then the next day the same thing. Now when I change the relay starter it cuts off. I did notice though when the fuse wo...

i have a 2006 i just put new engine in it and it wont start 1 Answer

i have a 2006 i just put new engine in it and it wont start