for some reason the fuse keeps blowing for the turn signals( hazard lights still working). we have replaced turn signal switch in the steering column itself and turn switch flasher located in the fuse box and problem still persists. any idea whats going on?

for some reason the fuse keeps blowing for the turn signals( hazard lights still working). we have replaced turn signal switch in the steering column itself and turn switch flasher located in the fuse box and problem still persists. any idea whats going on? 3 Answers

My 1973 D 100 keeps dieing when i come to a complete stop I have new carb,alternator, and fuel pump and am still having the issue any ideas? 2 Answers

It will some times idle fine and other times especially after the motor warms up it cant hold the idle and dies Ive already a installed a new carburetor, new fuel pump and new alternator. Ive also tri...

When changing the manual drivetrain clutch how necessary is changing the flywheel? 1 Answer

I purchased a new clutch kit that recommended changing the flywheel and not to resurface it. I am replacing an identical clutch kit that the previous owner had a shop install which has failed within ...

i have 85 dodge D-150, when i turn on my bright lights the passenger side turn signal does not work. The driverside is fine it blinks fast, but works. and when i turn my hazards they work for a short 1 Answer

blinkers work when headlights are off, not when they are turned on

87 Dodge Ram d100. Brake light on dash is always on. How to fix it so it will pass inspection. 2 Answers

Also the cab brake light does not work. Anyone know the bulb number I need.