You installed a new mechanical fuel pump? Make sure the lever arm on the pump is against the cam that drives it.
Disconnect the fuel line at the carburetor. Crank the engine. With each revolution of the engine fuel should spurt out of the fuel line. If you can check the pressure, 6 to 8 PSI at each spurt is about normal. Hope that helps! Jim
How do I trouble shoot my fuel system on a dodge D150 w/318 motor and a new manual fuel pump, new rebuilt carb
Dodge D-Series
-
Maintenance & Repair
It will some times idle fine and other times especially after the motor warms up it cant hold the idle and dies Ive already a installed a new carburetor, new fuel pump and new alternator. Ive also tri...
1973 Dodge D-Series
-
Maintenance & Repair
Also the cab brake light does not work. Anyone know the bulb number I need.
1980 Dodge D-Series
-
Maintenance & Repair
I purchased a new clutch kit that recommended changing the flywheel and not to resurface it. I am replacing an identical clutch kit that the previous owner had a shop install which has failed within ...
1976 Dodge D-Series
-
Maintenance & Repair
I need to know what colour the rear negative speaker wires are in a 1992 Dodge D250. Both are brown, one with a yellow stripe and one with a blue one, any help would be great, thank you
Dodge D-Series
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.