Replaced headlamp switch and fog lights not working

Asked by partsgirl2821 Jun 18, 2018 at 08:38 AM about the 2008 Chrysler Aspen

Question type: Maintenance & Repair

I replaced the headlamp switch with new OEM switch (68269910AA) now the
fog lights do not work. I checked the circuit and it was fine. Any ideas?

1 Answer
26,810

oilyspill answered 5 years ago

You can check the fuse and do some testing at the fog relay? You could unplug relay and use proper jumper wire between terminals 30 and 87, terminal 30 should be hot all the time. If the fog lamps work with the jumper, but not w/o, then the problem is on control side of relay, the left side in the diagram, that side needs voltage and ground. The headlamp switch is involved so you may need to double check your work, if you haven't already? Just my opinion.

1 people found this helpful.
Mark helpful

Your Answer:

Related Questions

  • Replaced headlamp switch and fog lights not working 1 Answer

    I replaced the headlamp switch with new OEM switch (68269910AA) now the fog lights do not work. I checked the circuit and it was fine. Any ideas?

    2008 Chrysler Aspen

    -

    Maintenance & Repair

  • Ground wire for fog lights 1 Answer

    Where is the ground wire to the relay for the fog lights? I can’t find it and I can’t find anything online for it.

    2008 Chrysler Aspen Limited 4WD

    -

    Maintenance & Repair

  • What is your recommendation? 9 Answers

    I have a 2007 Chrysler Aspen that I bought new. The 1st year Chrysler dealer replaced my GPS/CD/AMFM/Sirius Satellite unit 3 times under warranty and once for free when out of warranty. Each time th...

    2007 Chrysler Aspen Limited AWD

    -

    Maintenance & Repair

  • Why is my engine knocking? 1 Answer

    My chrysler has been sitting for a couple years and finally got around to get it running again. After starting and I got it to idle it started to make a knocking noise. I have change the oil and fi...

    2008 Chrysler Aspen Limited 4WD

    -

    Maintenance & Repair

  • Chrysler Aspen deactivation solenoid 1 Answer

    I have a 2008 Chrysler aspen and gotta replace the deactivation solenoid got the part but how long is it drivable before I do or should I park it up till I can get it into the shop?

    2008 Chrysler Aspen Limited 4WD

    -

    Maintenance & Repair

Shortcuts

Search Chrysler Aspen Questions

CarGurus Experts

  • #1
    Spikeaspen
    Reputation
    210
  • #2
    Randy Melancon
    Reputation
    100
  • #3
    Gene Arnett
    Reputation
    90
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Dodge Durango
61 Great Deals out of 1,829 listings starting at $6,987
Used Jeep Grand Cherokee
133 Great Deals out of 3,657 listings starting at $4,999
Used Chrysler 300
28 Great Deals out of 519 listings starting at $6,898
Used Jeep Commander
7 listings starting at $3,999
Used Toyota Sienna
43 Great Deals out of 635 listings starting at $2,499
Used Chrysler Pacifica
25 Great Deals out of 739 listings starting at $15,495

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.