Automatic wil go in Reverse, in First, second. I take of in the middle at m is an A bolt, what is this for, se picture

Asked by GuruX9BP8 Oct 04, 2018 at 09:25 AM about the 2003 Jaguar X-TYPE

Question type: Maintenance & Repair

in the middle at the bottom is an Allen bolt, what is this for, has been out
because I thought for level oil control, my problem is that the car is not in 3, 4,
5 gear, vending machine runs in 1 and 2 windshield and reverse.
Engine 2.0 V6 automatic

GuruX9BP8 answered 5 years ago

Foto above

Mark helpful

Your Answer:

Automatic wil go in Reverse, in First, second. I take of in the middle at m is an A bolt, what is this for, se picture 1 Answer

in the middle at the bottom is an Allen bolt, what is this for, has been out because I thought for level oil control, my problem is that the car is not in 3, 4, 5 gear, vending machine runs in 1 and...

2003 Jaguar X-TYPE

-

Maintenance & Repair
My 02 XType doednt calculate gas mileage or distance correctly anymore and the gas mileage is half of wjat it was before i took it in for a wheel bearing replacement...What is wrong? 5 Answers

I sove the car on a bad bearing for a couple months... trust me I wouldn't of had I had the money for repare. I had the wheel bearing replaced three days ago now the car gets the worste gas mileage o...

2002 Jaguar X-TYPE

-

Maintenance & Repair
jaguar 2006 x type needs a new timing chain and tensionaires.etting a quote of $4500 for all parts and labor.Also going to clean out oil sludge in engine. is this in the ball park? 2 Answers

The car monitor said check catalytic converter. It was skipping at slow speeds. brought to a Jag dealer and they had to take most of the engine apart before physically seeing the timing chain skip. Ne...

2006 Jaguar X-TYPE 3.0L Sedan AWD

-

Maintenance & Repair
What is the s button for in the jaguar X type 2 Answers

What is the s button for in the jaguar X type I had it in a collision shop and when I picked it up the S light was ON I don't know if someone accidently hit the button or what???

2007 Jaguar X-TYPE 3.0L Sedan AWD

-

Maintenance & Repair
what makes a clunk noise in the rear of the car going over bigger bumps 1 Answer

Just put new shocks in the rear of the car. There was a clunk noise when you went over bigger bumps or you hit a bit bigger holes and the clunk noise is still there after the shocks are in. Trying t...

Jaguar X-TYPE

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.