when pusshing on clutch pedal it's not releasing the gears. what' the problem and solution?

The clutch is the connection between the transmission from the engine. It may be that the clutch is not working to disconnect. It could be the transmission is bad. Can you change gears when the engine is not running?

Yes. And when I'm able to engage the a gear when holding down the pedal it seems to engage slowly. Wanting to push me into a intersection.

Where is that located at?

on the side of the transmission is a large "tootsie roll"...this is your slave cylinder...you'll need someone to open the bleeder valve and shut it once the helper presses the clutch pedal...the pedal is linked to another large tootsie roll that pushes the hydraulic fluid...this one's got seals that are crappy and not containing the fluid anymore~ replacement parts are....like not that much~>>>>http://www.jcwhitney.com/clutch-kits/dodge-ram- pickup/c3651d18048j1s21.jcwx

The clutch fluid reservoir is on the fire wall next to the brake fluid reservoir. The master cylinder is under the reservoir. The slave cylinder is where oper. 13 described.

wondering if anyone is still answering anything on here, my truck is 96 dodge ram 2500 standard, and the truck is not going into gear, any suggestions

I would suggest checking master and slave if you find one bad its not expensive save your self time and worry replace both units mechanic 41yrs class 8 / heavy equip/ com diesel pick ups lol

HAVE REPLACED CLUTCH DISK , PRESSURE PLATE, THROW OUT BERING, CLUTCH ARM, AND SLAVE CYLINDER AND RESERVOIR. STILL HAVE TO PUSH PETAL TO THE FLOOR TO DISINGAUGE CLUTCH..

Clutch rod assembly is the culprit. You need to remove the pedal assembly and replace the worn out bushings and / or fabricate a new rod. This is the rod that pushes in the hydraulic cylinder mounted on the firewall.

I have a 99 dodge 2500, my truck started this morning and died, remind you its a standard 5 speed. when you have to push in the clutch to start the truck wil usually try to turn over..... ow its doing nothing except restarting my radio the truck will not do anything at all whats wrong

I have a 2007 Dodge ram 3500 replaced clutch twice in the past six months When I push the pedal to the floor truck will not go into gear when I release pedal about halfway I can shift through all the gears when I put it in gear and push the pedal to the floor truck starts to move like I’m releasing the pedal any idea what’s going on

I need help if possible I was handed down my dad's 83 D150 Dodge Ram and I'm trying to find were the clutch fluid is and how to add more to it if needed. If anyone can help me I would greatly appreciate it.

I have a 2002 Dodge Ram 2500 6speed 5.9l Cummins. Why do my speakers only work when I push my clutch in. When I release my clutch the speakers stop playing music. Radio is still on but no sound until I press my clutch in... any ideas? Thanks

I have a problem with the truck not wanting to go into gear but if I’m still rolling the truck has no problem but if I push the clutch to the floor really hard I can get it into gear