littlehorn answered 16 years ago
Did you properly set the depth of the plunger assembly between the master cylinder and brake booster when assembling it? How about bench bleeding the master cylinder, as well as bleeding all of the wheels and lines? You might also want to check for vacuum leaks or other probs. that could cause your vacuum booster not to work.
I have replaced everything on my brake system and still have no power brakes. Is there an adjustment I have overlooked?
1957 Ford Thunderbird
-
Maintenance & Repair
I turn the key and get nothing: no accessories and the starter motor does not turn. I cleaned the battery terminals and replaced the ignition switch on the steering column. The headlight switch ha...
1971 Ford Thunderbird
-
Maintenance & Repair
New shoes installed. System bleed. Still does not have any pedal. Acts as Booster is not working. Checked all hoses and appears to be OK. Just purchased car and brakes had a good pedal and then starte...
1964 Ford Thunderbird
-
Maintenance & Repair
I tried the lock this morning, will not work, key does not even click, no lights at all. Was okay 2 days ago
2003 Ford Thunderbird
-
Maintenance & Repair
put new pads on front .got soft pedal. pressure bled the brakes all 4..soft pedal.put new master cylinder on.bench bleed.cracked the brake line at master bleed it there also.still soft brakes .and wil...
1995 Ford Thunderbird Super Coupe RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.