Make sure the battery has a full charge and all battery cables and connections all good. If battery is down, can't do any testing. If battery is down, use a charger and get it charged up. Grounds are important also, battery ground--engine ground--chassis ground. So you need voltage and ground. With a charged battery, voltage and grounds, good. Pick any system that doesn't work and I'll try to post wiring diagram for that system and we'll check it out. If you want wiring diagram for starter motor, I'll post it. Let us know.
My S10 is completely dead, I know this but it's making a weak clicking noise even without the key in it sounds almost like a slow turn signal click anyone ever have that problem?
1998 Chevrolet S-10
-
Maintenance & Repair
I have a. 2000 s10 2.2 standard truck.about 6 months ago it died while I was driving for the first time.happened sporadically and I noticed that if I was under a half of tank of gas or if it was ...
2000 Chevrolet S-10 RWD
-
Maintenance & Repair
I have put a new starter on the truck and new battery in. it started 1 time off the key and will not crank off the key now I can roll start it and it will run great til the bat goes dead
Chevrolet S-10
-
Maintenance & Repair
I have had the fuel filter, spark plugs, wires and Fuel Pressure Regulator replaced recently and my truck seems to hesitate when I'm driving.
1995 Chevrolet S-10 LS LB RWD
-
Maintenance & Repair
My truck will start but once it gets going and I push my breaks it will die but it will start right back up
1992 Chevrolet S-10
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.