Asked by cherrypie Aug 15, 2011 at 01:44 PM about the 2002 Lexus GS
Question type: Maintenance & Repair
Just had wheel barron replaced and brakes done, now my ABS/VSC light is on. When I accelerate, the car wont go and seems to want to drag a bit... Any suggestions as to what it may be? Any help would be appreciated!
Just had wheel barron replaced and brakes done, now my ABS/VSC light is on. When I accelerate, the car wont go and seems to want to drag a bit... Any suggestions as to what it may be? Any help woul...
2002 Lexus GS
-
Maintenance & Repair
While driving On my way to work I noticed the vsc abs vsc off lights came on. The car was driving fine but it still worried me. Once I got out of work and got back in the car the lights were off and...
1998 Lexus GS
-
Maintenance & Repair
I recently got a VSC and Check engine light. I had the code read. It is C1201 (Engine Control System Malfunction) and P0304.(Cylinder 4 Misfire Detected).Could the Cylinder 4 Misfire cause the Engine ...
2008 Lexus GS 350 RWD
-
Maintenance & Repair
My check engin light comes on as well as teh VSC light, and car stalls out, wont die idles fine but no rpm's. Checked by a diagnostic computer but computer shows nothing wrong, only happens when car i...
1999 Lexus GS
-
Maintenance & Repair
Hi, my Lexus gs300 will not crank and start after being fine when parked up the night before. The radiator fan will kick in when ignition is on but engine will not start. Check VSC has come up. When d...
2005 Lexus GS 300 RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.