the engine in my 2001 mitsubishi will rotate but will not start. new computer, front ecu, camshaft sensor and has been rekeyed. scan code is P1610

the engine in my 2001 mitsubishi will rotate but will not start. new computer, front ecu, camshaft sensor and has been rekeyed. scan code is P1610 5 Answers

My 1998 Mitsubishi eclipse 2.0 non turbo will not start when I turn the ignition there is knocking slapping coming from engine area . What is causing this and how can I fix it? 4 Answers

My girl drive it to work with no issues then she said she heard a loud slapping sound and started to lose power she pulled over sat for a sec started it it turned over drove a short distance with...

I have a 2001 2.4 liter manual eclipse that will start but won't turn over. Funny thing it's when I pop start it in gear it runs. And it runs great. I put a new water pump and timing belt on it. 1 Answer

I have a 2001 2.4 liter manual eclipse that will start but won't turn over. Funny thing it's when I pop start it in gear it runs. And it runs great. I put a new water pump and timing belt on it. S...

I have a 96 eclipse gs and it is giving me a P0300 code which Ive done a lot of research on and changed a few things but still getting code. If I have a 97 motor in it will the ECU read the components, IE: fuel injectors, egr, etc,. wrong or it doesn't matter.? 2 Answers

WE have replaced egr valve cam censer egr control valve but keep getting the same code.

Ok I have a 1992 mitsubishi eclipse gs turbo. It has been sitting up for 10 years. I replaced the ecm computer and the fuel pump relay . It still won't crank. My fuel pump still isn't comming on and I have checked all the fuses that I know to check. The car tries to crank when I pour a little gas in the cylinder. It is driving me crazy trying to figure this out. Any suggestions on what to do now?? 28 Answers

How do I know if my injectors are stopped up or not? The fuel pump should be comming on its new so is the relay. Whats wrong?