Ford probe cranks and falls dead after replacing main fuse will not run after hooking jumper cables up incorrectly/backwards what is necessary for repair? Without hiring an auto mechanic.

Ford probe cranks and falls dead after replacing main fuse will not run after hooking jumper cables up incorrectly/backwards what is necessary for repair? Without hiring an auto mechanic. 1 Answer

What is this exactly and will it cause my my probe to not go into gear. 3 Answers

I have a 1995 ford probe 2.0 manual transmission. The car has 86,650 original miles. It starts great but wil not drive. I can dhift through all the gears without anything happening. I thought it ...

1994 Ford Probe GT 1 Answer

My 1994 Ford Probe GT cranks but does not start. It cranks strong, has gas, air filter is old and cleaned out but should still start ??? Can't tell if fuel pump is out tried to hear it but couldn'...

1993 Ford Probe GT runs rough. 3 Answers

1993 Ford Probe GT, 28k miles, suddenly idles rough after warmup, struggles and shakes through 2nd gear, runs but not correctly in other gears, seems to burn more fuel. Going to try new fuels filter....

Does the NSS Switch also tell the on board computer what gear to be in and when to shift on a 1989 Probe? 1 Answer

I need a 1989 Ford Probe Specialists to answer this question. I replaced a faulty neutral safety switch on a 1968 Ford Probe (1st Generation) but the old switch had 2 plastic connectors, one with 3...