I have a 4speed 1968 chevy c10 straight 6 pickup and when i put in reverse it makes a very loud popping sound....need new transmission? Or can problem be fixed?

I have a 4speed 1968 chevy c10 straight 6 pickup and when i put in reverse it makes a very loud popping sound....need new transmission? Or can problem be fixed? 1 Answer

I have a 1971 C10 with a 3 speed on the column. I can put the shifter in all 3 gears and reverse but when I let out the clutch the truck does not want to move until i accelerate and increase the RPM. 3 Answers

As far as I know the clutch is good. There is no noise or odor that indicates to me the clutch is bad, but I don't know for sure it could be I'm no expert on clutches. How can I know for sure if it ...

My truck won't move when I put it into gear. 2 Answers

I have a 77 chevy c10 with a turbo 400 tranny it won't go in gear when I put it into drive and makes a humming sound but if I put out in L1 it moves just fine and if I go into drive once I get mov...

I have a 1984 Chevy c10. I just recently got it started but it just seemed to die after a few seconds.. It helps when I pump the gas but it still won't run long enough to put it into gear and drive.. 2 Answers

I'm only 16. Its my first truck and idk a whole lot but I think ik quite a bit for my age.. The truck has a 350 in it with 42k miles on it.. Any help would be greatly appreciated!

1982 chevy c10 it runs goods but it act like its out of gas sometime i cleaned carburetor and it ran for a little bit and it keeps doing it 2 Answers

I have not change none on it but the filter in carburetor please months early it just would cut off while driving the filter was done i change it and it ran good know it runs sometimes its act like ...