Nice middle finger, lol. Anyway you can try soaking the nut in penetrating oil, let it soak in and keep spraying it, it may have to soak in the penetrating oil, for a say ir so. You can try heating the nut. If you have the room you can put a pipe over the wrench or ratchet and use leverage to remove a nut...good luck
How do i get the nut loose on the passenger side mount? The nut is VERY tight.
1996 Ford Taurus
-
Maintenance & Repair
Instructions for replacing mount - is this correct? Should I really raise the engine using a block of wood under the oil pan? Is it as simple as depicted here? Instructions follow: The motor mounts...
2002 Ford Taurus SE Wagon
-
Maintenance & Repair
I have a 2000 Taurus ses dohc and since I got it in September I've had nothing but problems but I was wondering if anyone can tell me where the white smoke is coming from in my attached pictures.....
2000 Ford Taurus SES
-
Maintenance & Repair
2005 ford Taurus 3.0 ohc coolant draining fast from somewhere above the rear Sid if oil pan/plug. What could it be?
2005 Ford Taurus SEL
-
Maintenance & Repair
my taurus has started to miss when it idles and when your accelerating to higher speeds, the plugs are good, the injectors were cleaned 12,000mls ago, any ideas?
1996 Ford Taurus
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.