After replacing transmission it wont even turn over only makes a loud warning sound. What dide possibly miss when it was put back totogether ?
5 speed manual V6
Your Answer:
Related Questions
-
After replacing transmission it wont even turn over only makes a loud warning sound. What dide possibly miss when it was put back totogether ? 1 Answer
5 speed manual V6
1996 GMC Sierra 1500
-
Maintenance & Repair
-
What would cause the transmission to indicate fluid over fill & blow out vent when the proper amount of fluid was put in (& even after draining a quart after that? 4 Answers
2001 GMCz71 w/ 207,000 miles, well cared for. mech tells me my xfer case has a little leak, cleaned it up & we were going to watch it. 700 interstate miles later, undercarriage coated. Took it to de...
2001 GMC Sierra 1500 SL 4WD Extended Cab SB
-
Maintenance & Repair
-
I have a 2015 GMC Sierra with only 4000 miles on it and it makes a rattling noise when it starts then when it hits 210 on temperature it stops the noise what could be the issue 15 Answers
It only does it in the mornings and it sounds like something is either loose or just vibrating against other metal. I have no problems with the truck or from what i can tell it just makes that annoy...
2015 GMC Sierra 1500 Base
-
Maintenance & Repair
-
04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer
died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...
2004 GMC Sierra 1500
-
Maintenance & Repair
-
I HAVE A 1994 GMC SIERRA 2 WHEEL EXTENDED CAB THE TRANSMISSION WOULD ONLY SHIFT FROM 2 TO DRIVE DROVE LIKE THAT FOR A WHILE THEN IT STOP PULLING ALL A CERTIAN COULD SOMEBODY TELL ME WHAT THE CAUSE 6 Answers
THE TRANSMISSION WOULD ONLY SHIFT FROM 1 TO 2 BUT IT WOULD NOT SHIFT TO DRIVE OR WHEN YOU GO TO DRIVE IT WOULD STELL BE IN 2 DROVE LIKE THAT FOR A WHILE BUT ONE DAY COMMING FROM CHURCH THERE WAS A CLU...
GMC Sierra 1500
-
Maintenance & Repair
Shortcuts
Search GMC Sierra 1500 Questions
CarGurus Experts
-
#1yetilikesbeerReputation12,350
-
#2dragonflyoffshoreReputation11,500
-
#3John SaffrahnReputation11,450
Find great deals from top-rated dealers
SearchRelated Models For Sale
Used Ford F-150
311 Great Deals out of 13,471 listings starting at $4,888
Used Toyota Tacoma
41 Great Deals out of 752 listings starting at $9,975
Used GMC Yukon
17 Great Deals out of 934 listings starting at $5,890
Used Dodge RAM 1500
3 Great Deals out of 82 listings starting at $2,500
Used Chevrolet Tahoe
20 Great Deals out of 774 listings starting at $7,499
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.