I am rebuilding a 1979 350 bored 30 over for towing horse trailer I want a rv cam what size can I use

I am rebuilding a 1979 350 bored 30 over for towing horse trailer I want a rv cam what size can I use 1 Answer

in need of serious help i have a 1979 chevy 350 truck. i replaced the distributor cap, rotar, ignition coil, ignition coil module, starter, and spark plugs any help on his would be amazing im pretty s 3 Answers

in need of serious help i have a 1979 chevy 350 truck. i replaced the distributor cap, rotar, ignition coil, ignition coil module, starter, and spark plugs any help on his would be amazing im pretty s...

i have small block bore 40 over running flattop piston crank turn 10 i have a 274 hydraulic cam in it now 6 Answers

building back a 350 come out a 71 belaire four door going in a C10 PICKUP

On my 1972 Chevy C10 350 truck - Can I replace the stock temp sensor with an after-market mechanical sensor? If so, can I use the stock sensor location for the after market unit? 1 Answer

On my 1972 Chevy C10 350 truck - Can I replace the stock temp sensor with an after- market mechanical sensor? If so, can I use the stock sensor location for the after market unit? With test light th...

I have a 1971 C10 with a 3 speed on the column. I can put the shifter in all 3 gears and reverse but when I let out the clutch the truck does not want to move until i accelerate and increase the RPM. 3 Answers

As far as I know the clutch is good. There is no noise or odor that indicates to me the clutch is bad, but I don't know for sure it could be I'm no expert on clutches. How can I know for sure if it ...