2002 Ford Explorer - REAR signals/flashers not working

Asked by Brooke Jul 04, 2019 at 06:43 PM about the 2002 Ford Explorer

Question type: Maintenance & Repair

Both REAR signals are not working and the
front are still fully functional - in hyper speed
mode of course. I have replaced the bulbs
and fuses. Still same issue.

Is it possibly the relay or some other issue
since the front flashers are still working?

2 Answers
7,455

Brian answered 4 years ago

There is a relay underneath driver's dash left footwell in SJB (smart junction box) You will need a mirror to see behind the fuse panel where the relay hides. Good Luck!

Mark helpful
73,320

OJ answered 4 years ago

Rapid flashing turn signal indicators on the dash means the vehicle senses a bulb is burned out. If none are, there is a change in the resistance on the circuit. When a change is detected, the indicator lights flash faster. You may have a faulty resistor.

Mark helpful

Your Answer:

Related Questions

  • 2002 Ford Explorer - REAR signals/flashers not working 2 Answers

    Both REAR signals are not working and the front are still fully functional - in hyper speed mode of course. I have replaced the bulbs and fuses. Still same issue. Is it possibly the relay or some ...

    2002 Ford Explorer

    -

    Maintenance & Repair

  • 2002 ford explorer lower beams not working 1 Answer

    My 2002 ford explorer lower veams not working everything else works just fine what can it ve rhe problem

    2002 Ford Explorer Limited

    -

    Maintenance & Repair

  • my 2002 ford explorer 4x4 not working 3 Answers

    we tried to hit the transfer case and the 4x4 kicked in we turned it off and let it sit for a couple of hours and went to go drive it and the 4x4 would not kick in

    2002 Ford Explorer XLT

    -

    Maintenance & Repair

  • 2011 Ford Explorer rear running lights on trailor not working 2 Answers

    what is the fuse number 2011 explorer rear trailer lights

    2011 Ford Explorer Limited 4WD

    -

    Maintenance & Repair

  • Turn signals stop working on 97 Ford Explorer 2 Answers

    My 97 Ford Explorer turn signals just stop working hazards still work fine. In fact if I run the hazards for 10 or more minutes the turn signal will work again for short period before cutting back...

    1997 Ford Explorer 4 Dr XL 4WD SUV

    -

    Maintenance & Repair

Shortcuts

Search Ford Explorer Questions

CarGurus Experts

  • #1
    OJ
    Reputation
    30,850
  • #2
    TransAm77
    Reputation
    7,790
  • #3
    Gene Arnett
    Reputation
    7,280
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Ford Expedition
20 Great Deals out of 670 listings starting at $7,894
Used Ford F-150
311 Great Deals out of 13,802 listings starting at $4,500
Used Chevrolet Tahoe
12 Great Deals out of 806 listings starting at $9,980
Used Jeep Grand Cherokee
140 Great Deals out of 3,673 listings starting at $5,555
Used Toyota Highlander
38 Great Deals out of 828 listings starting at $7,498
Used Dodge Durango
54 Great Deals out of 1,876 listings starting at $6,987
Used Honda Pilot
38 Great Deals out of 964 listings starting at $1,230
Used Toyota 4Runner
27 Great Deals out of 553 listings starting at $7,700
Used Ford Escape
129 Great Deals out of 4,256 listings starting at $3,999
Used GMC Yukon
16 Great Deals out of 967 listings starting at $3,000
Used Chevrolet Silverado 1500
195 Great Deals out of 7,896 listings starting at $3,000

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.