I have a 1998 chevrolet cheyenne 4.3 4x4. I was wondering what would be the best engine swap and what all i have to have before i dive in to this thing. I also have a spare 1988 350 4 bolt main dont have nothing to put it in and how hard to swap v6 vortec to a 1988 350 TBI . Thank you for reading and answering.
I have an old 350 small block came out of a 68 c10 and I have a 98 Silverado with the 5.7 vortec. I was wondering if I kept the carb on the old 350 I could swap it into the new truck. Would there b...
1998 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
Will an engine from a 1994 chevy 1/2 ton fit my 1988 chevy 1/2 ton?
1988 Chevrolet C/K 1500 Silverado RWD
-
Maintenance & Repair
My engine has blown. It's a 4.3 litre V-6 Vortec with 4 speed overdrive automatic trans. Will the engine / transmission from a 2001 GMC sierra fit into my Chevy ? Both motors are 4.3 litre V-6
1996 Chevrolet C/K 1500 Cheyenne Extended Cab RWD
-
Maintenance & Repair
I am changing out my 5.0 305 engine for a 5.7 350. I am using the same intake manifold. What all will I need to replace that shouldn't be reused. This is my list so far - Distributor cap Distributo...
1997 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
Hello, my motor locked up so I found a beater truck that had a good engine in it. My truck is a 98 Chevy k1500 and the Truck was a 97 k1500. So it’s a 5.0 to5.7 engine swap. Got the motor in and it...
1998 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.