You should be able to see the problem. Look for burnt areas of the gasket or a spot where the gasket layers have separated.
Maybe yes and maybe no. If coolant was going into a cylinder the combustion chamber and valves will be much cleaner than the others. Coolant cleans all the carbon off. In a 4.6 Ford engine that has not been overheated a bad head gasket is not a common problem.
I have a 2009 crown vic police interceptor.. When car is in park its fine.. I start driving loss of power some popping coming threw exhaust.. Took cats off thought that was problem still doing it...
2009 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I recently swapped LEDs in for the regular bulbs, i need to replace the turn signal flasher relay in order to stop the hyper flashing, but i cant seem to find it. Help please
2011 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I'm having the same problem with my car, I have to hold break and rev it to get it in drive. Once driving there are no problems at all. Goes into reverse fine to. Right before all this started ...
2007 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I need help on any information about my 97 crown Victoria cause I'm stumped.it starts to wobble a little bit when I almost get to 45mph but manageable, but on the highway/freeway it wobbles so ...
1997 Ford Crown Victoria
-
Maintenance & Repair
If u have a bad intake what it make ur car do on a crown Victoria LX 04
2004 Ford Crown Victoria LX
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.