Ford Bantam Questions Maintenance & Repair
2008 Ford Bantam OBD Scan Tool
Need to find a OBD scanner that will work with the 2008 Ford Bantam ECU. I have tried three different tools and none read the OBD - ECU with communication errors . What does work?
2008 Ford Bantam Rocam 1.6 Missfire
Hi Guys, My 1.6 Bantam Rocam 2008 misses slightly when cold and a lot when it reaches peak heat. i have installed new Spark Plugs, HT Leads, CoilPack, Petrol Pump, Head Gasket and problem is still t...
Ford Bantam Advice Please
Have just replaced my 1300 engine with a "low milage import" engine Do I need to re-program the ECU unit?Car is a 2010 model. I am in Sasolburg Freestate
Why Are My Injectors Spraying All At Once Constantly?
all the injectors are spraying at once constantly. ecu has been tested/replaced, same problem. all wiring been replaced. Temp sensor been replaced with genuine part, all other sensors replaced. fuel r...
How To Fix My Rocam Problem
my rocam is giving me a problem when I start it only swings one way, I called the mechanic and he found out that the car has no compression then he also found that the oil pump was not working. He d...
FORD BUNTAM CVH ENGINE
HI MY FORD BUNTAM CVH ENGINE STARTS BUT DOES NOT IDLE and WHEN I REV IT THE IS A FLAME COMIN OUT OF THE CARBURATOR
Why Does Coolant Leak Through The Temperature Sensor??
Coolant leaks through the temperature sensor and the thermostat housing does not leak, What might be the cause of that?? Rocam 1.6
Ford Ikon Rocam 1.6 Rough Idle
My Ford ikon rocam, keeps on taking out alot water out of the exhaust, loses power and it idles rough
Fan Not Working Even When I Unplug The Temperature Coolant Switch
My ford bantam 1300 rocam fan won't switch on even if I unplug the temperature coolant switch. But works when I connect it directly on the battery
2014 Ford Bantam 1.4 TDCi
The Fiesta and Ikon seems to have the same wiper motor than the Bantam. Does the Rocam and Diesel have different wiper motors?
FORD BANTAM XLT ROCAM
MI BANTAM HAS A FLAT SPOT IF I PULL AWAY AFTER I WENT OVER A HUMP, OR IF I WANT TO PASS A NOTHER VEHICLE OR IF I SLOW DONW AT A HEALT SIGHN AND PULL AWAY MOSTLY IN 2ND GEAR AND 3RD GEAR SOME TIMES ...
Noise From The Front Of A Ford Bantam
Hi Sir. I am driving a Ford Bantam 1.3 XLT, 2007. There is a funny noise coming from the front when i am driving on a bumpy road. I have changed both wheel bearings, hub , the control arms and the b...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.