Heater not working.
So I’ve recently had my heat pump changed,
and new rad hose put on. But now my heater
doesn’t work at all. Nothing but cold air
wondering if this is an easy fix or if it’s going
to cost me an arm and a leg.
Get all the air out of system. You can do it yourself.
Bleed air from system like this remove cap from overflow tank fill with antifreeze to full mark leave cap off and start vehicle and let idle you will notice level in tank start to rise this is normal once thermostat starts to open level in tank will drop add more antifreeze to full mark then put cap back on.