Asked by maximusmirides Jul 29, 2019 at 02:43 PM about the 2008 Ford Crown Victoria Police Interceptor
Question type: Maintenance & Repair
The differential/axel is gone in my Crown Vic. The gasket is in pieces and the
oil is black and like jello. My question is will a 2007 Crown Victoria
differential/axel work in my 2008 Crown Victoria Interceptor?
Rednechteck answered 4 years ago
Knock it all out and change pinion seal To so you won't have too go back under there as well and make sure it has fluid and add friction modifier as well.
The differential/axel is gone in my Crown Vic. The gasket is in pieces and the oil is black and like jello. My question is will a 2007 Crown Victoria differential/axel work in my 2008 Crown Victoria...
2008 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I've got an 04 crown victoria interceptor, 327 gears currently installed, wondering if Id need to modify the rear end to handle 373 gears?
2004 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I have a 2004 ford crown Victoria 4.6L. The numbers on the pumpkin are V026N 73 88 4B26. What is the gear ratio I need to replace it?
2004 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
What kind of transmission do I need to get for a 1999 crown Victoria police interceptor? Can I use one from any model up to a 2010?
1999 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I have a police interceptor 2007 crown victoria and I replaced the alternator due to the clutch going out and my battery light is on now. I did not pay the $300 for the alternator for the police in...
2007 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.