Rear end
Asked by Stanley5611 May 27, 2018 at 12:14 PM about the 2000 Ford Crown Victoria Police Interceptor
Question type: Maintenance & Repair
I Have A 2000 Crown Vic p71 The rear End Is Gone And Is
Leaking Im Planning on Changing The Whole Assymbley .
What Crown vic Model Rear Ends Will Fit My 2000 p71
Does It Have To Be off of a A p71 model ?
Can i use A Grand Marquis 2000 rear Axle ?
11 Answers
Jorge answered 2 years ago
COMPLETE rear ends from 98 to 2008 Crown Victoria and Grand Marquis can be swapped as a whole unit. However the number of splines in the axle can be different in Police Interceptor, as may universal joints during the years. Again, swapping over a complete unit should not be a problem, but remember the model and year you got it from in case you need parts. Keep the u joint and save all its parts during removal from the donor car, just in case.
TIM answered 2 years ago
1998-2002. 2003 up is wider,zplines makes no difference as all 1998-2002 weren't 31 spline anyway
Crazy_Canuck answered about a year ago
Shock mount locations also changed around 2003. I have a 2009 P71 rear end that will not go into my 1998 Crown Vic because of this.
TIM answered about a year ago
1998 is narrower than 2003 up. all complete assys from 03 up interchange. 08 up 31 spline but makes no difference about spline count when swapping complete assy. 1998-2002 interchange. 2003-2011 interchange. end of story
The answered about a year ago
@Crazy_Canuck do u want to sale that rear end that u can't use?
GuruNY5ZC answered about a year ago
I have a 98 Grand Marquis can I use a 2002 Crown Vic Police interceptor rear end in it???
GuruGL953 answered 4 months ago
I have a 2005 CV police interceptor, the rear end is leaking from the front pinion seal, I have a 2000 and a 2003 interceptors, which year interchanges with my 2005? I read something from Tim who said 1998-2002 and 2003-2011 are the true interchangeable parts years, no if, and, or but about it.Can I get a second from anyone?
Scott answered 4 months ago
2003 and up will swap out. You can also use the earlier axle, but you will have to use the earlier soft brake lines and adapt the ebrake cable. The shock mounting points are already on your current car, they just left them when moving the shocks to the outside of the frame. The rest of the mounting points are the same.
Guru997QTB answered 2 months ago
how to correct the speedo meter reading after a gear swap from 2.73 to 3.73 in a 2005 crown vic LX ???
LeDondre answered 2 months ago
How many splines in a 04 P71 I'm thinking 31