How would I be able to check for codes and the car won't crank?
You need to get access to an OBD II Scanner and plug it into the port on the vehicle. The access port is typically located under the steering column. This tool will bring up any diagnostic codes if the ECM is detecting any faults.
I have a new battery and alternator.
2004 Chevrolet Malibu FWD
-
Maintenance & Repair
need to find out whats wrong with car
2001 Chevrolet Malibu FWD
-
Maintenance & Repair
After we sat for a little bit it started right up.today after driving about 100 miles my svc tire light comes on and my car started slowing down had to pull over. I tried to start it again but wou...
2009 Chevrolet Malibu 1LT FWD
-
Maintenance & Repair
The ignition will turn over with no problem, but it will not crank it has a little gas, but it still will not crank
2011 Chevrolet Malibu 1LT FWD
-
Maintenance & Repair
The car was just working fine yesterday but when i tryed to go to work this morning it started.
2002 Chevrolet Malibu LS FWD
-
Maintenance & Repair
CarGurus has 1,071 nationwide Malibu listings starting at $2,495.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.