Can the reason why a engine wont start because of the wires?

Asked by Guru5H8RH Jan 18, 2018 at 07:58 PM about the 1993 GMC Sierra 1500 C1500 Extended Cab SB

Question type: Maintenance & Repair

93 gmc sierra 1500 need some solutions
changed the spark plugs and made sure
they were put back in the right place and
now it won't start thinking maybe it's the
wires or the starter

Guru5H8RH answered 6 years ago

It just won't fire up check the starter wire it's okay

Mark helpful

Your Answer:

Can the reason why a engine wont start because of the wires? 1 Answer

93 gmc sierra 1500 need some solutions changed the spark plugs and made sure they were put back in the right place and now it won't start thinking maybe it's the wires or the starter

1993 GMC Sierra 1500 C1500 Extended Cab SB

-

Maintenance & Repair
Will a plug on the trany make my truck not start or have anything to do with it? Thought the plug was wired wrong because truck wont shift right 2 Answers

Wired the plug different and now it wont start. And will the plug being wired wrong make it not shift right? My reverse lights are on in park. Any help? 2000 gmc sierra 4 wheel drive

2000 GMC Sierra 1500

-

Maintenance & Repair
04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer

died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...

2004 GMC Sierra 1500

-

Maintenance & Repair
RED AND BLACK WIRES INTO A BLACK BLOCK NEAR THE FIREWALL ON A 1997 CHEV SILVERADO 1 Answer

1997 SILVERADO WITH A 5.7 WHAT IS THIS ( SENSOR PERHAPS ) AND WHERE SHOULD IT BE MOUNTED? THE WIRES ORIGIONATE NEAR THE STEERING COLUMN / POWER BRAKE IN THE FIREWALL RED AND BLACK THEN CHANGE...

1997 GMC Sierra 1500

-

Maintenance & Repair
I have a 1996 gmc truck 4.3 v6 I replace my spakplugs and wires the coolant temp sensor. check engine light went off ran good for a couple of days now light is back on and truck doesn't want to start than when it does it runs really ruff till it is warmed up. any help would be welcomed 21 Answers

new plugs wires and coolant temp sensor

1996 GMC Sierra 1500 C1500 SL Standard Cab LB

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

Can the reason why a engine wont start because of the wires?

1 Answer

Your Answer:

Shortcuts

Search GMC Sierra 1500 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

Can the reason why a engine wont start because of the wires?

1 Answer

Your Answer:

Related Questions