Rocklobsta answered 8 years ago
Did you bench bleed the master cylinder before installing it? Did you bleed it after installation? You may also need to bleed all four wheels depending on how long you drove with a faulty master cylinder, as this can draw air into the system. What was the brake fluid level before you changed the master?
my brake are not working and the pedal goes all the way to the floor, i change the master cylinder but no change. i havent seen a leak any where.
Ford Thunderbird
-
General
I have a 62 thunderbird convertible and it has disc brakes on it. I bought it as a roller and now ready to put wheels and tires on it, I really want wires and wide white wall radials but al the compan...
1962 Ford Thunderbird
-
General
put new pads on front .got soft pedal. pressure bled the brakes all 4..soft pedal.put new master cylinder on.bench bleed.cracked the brake line at master bleed it there also.still soft brakes .and wil...
1995 Ford Thunderbird Super Coupe RWD
-
Maintenance & Repair
When I push the brake pedal down the pedal does not return. I have to pull it back up with my foot
1962 Ford Thunderbird
-
General
I have a 63 T-Bird. After driving a few miles, the back brakes start squeaking. LaterI can feel and smell them binding. Back wheels feel hot, front ones cool. Let the car cool down for 30 min and b...
1963 Ford Thunderbird
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.