FRONT AXLE AND HUBS AND BEARING

Asked by GuruR7D76 Feb 17, 2020 at 03:05 AM about the Ford Bantam

Question type: Maintenance & Repair

I BOUGHT A 1997 BANTAM LDV BUT I  HAVE TO REPLACE THE FRONT
AXLES,HUBS AND BEARINGS EVERY 3000KM WHY WHAT IS THE
REASON

1 Answer
16,455

Guru97FK8 answered 4 years ago

This is the Mazda 323 based Bantam. Replace the bearings. Use Mo-Di number 5 Molybdenum grease. Make sure all of the old grease is completely cleaned out and fit new seals. Use Shim Stock between the two tapered roller bearings (Not the cones) The torque on the tapered bearings is too high. By using shim stock between the two bearins on both sides , this will put less pressure on each bearing. The Molybdenum Grease has no soap in it, takes far higher pressures and temperature and is water repellant. Ideal for these high pressures.

Mark helpful

Your Answer:

Related Questions

  • FRONT AXLE AND HUBS AND BEARING 1 Answer

    I BOUGHT A 1997 BANTAM LDV BUT I HAVE TO REPLACE THE FRONT AXLES,HUBS AND BEARINGS EVERY 3000KM WHY WHAT IS THE REASON

    Ford Bantam

    -

    Maintenance & Repair

  • indicator lights not activating when swhitched on, lrft and right 7 Answers

    Indicator lights unit faulty at steering column does not switch on correctly. will come on occasionally and just goes off while in operation. Does not switch off once corner has been turned, also when...

    Ford Bantam

    -

    Maintenance & Repair

  • Leaking fuel , water and bakkoe is overheating. Ford rocam 1.6 1 Answer

    Hi we just replaced the head gasket on bakkie , but now there seem to be a whole lot of trouble with it . After the gasket were replaced they started the bakkie it started but oil leaking from the ...

    Ford Bantam

    -

    Maintenance & Repair

  • Noise from front wheels 1 Answer

    Hi there, I have a 2005 Ford Bantam 1.3I. There's this noise coming from my front left side wheel when turning right. I have replaced the inner and outer joints on both sides but the noise is still...

    Ford Bantam

    -

    Maintenance & Repair

  • 1.3i rocam stutters up to 3000rpm and then goes normal. What could this be? 2 Answers

    My Ford Bantam 1.3i is stuttering up to 3000rpm and the goes like a bomb. What could this be? Replaced the plugs allready. This happens after an engine wash...

    Ford Bantam

    -

    Maintenance & Repair

Shortcuts

Search Ford Bantam Questions

CarGurus Experts

  • #1
    Guru97FK8
    Reputation
    15,150
  • #2
    Janus Welgemoed
    Reputation
    1,140
  • #3
    MrRocket12
    Reputation
    1,120
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.