dynasg2009 answered 11 years ago
The ignition switch "NOT Ignition cylinder" which is on the steering column under the dash. You will have to remove the bolts and lower the column to get to the switch.
My car want crank security light on I pull to plugs off at da same time and didn't crank again
lights stay on on my 1997 crown vic. when the car is shut off. what is iy
1997 Ford Crown Victoria
-
Maintenance & Repair
one headlight stays on bright when car is turned off all switches off no key in ignition on my 2007 crown vic p 71, when running one light is on bright other is on dim when i turn to brights they ...
2007 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
down the brights to drive down the road(when you pull the switch towards you and you have to hold it) anybody have an idea?
2003 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
have an 83 Ford LTD Crown Victoria. The fuel pump stays running when the key is on. Is this normal? The car will not start. There is pressure at the injectors and power at the injectors but no f...
1983 Ford Crown Victoria
-
Maintenance & Repair
My 97 crown Vic rear lights won't stay on headlights work brake lights work blinkers work just rear lights won't stay on there's power running to them because they go on when I press the breaks an...
1997 Ford Crown Victoria 4 Dr LX Sedan
-
Maintenance & Repair
CarGurus has 2 nationwide Crown Victoria listings starting at $8,960.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.